Watch Your AC And Have Damages Repaired Without Delay

AC repairs are nothing to mess around with. As soon as an issue is found, the call should be made to get the repair tech out to diagnose the problem and fix it. There are a lot of different things that can end up going on with your AC system, and ignoring them can be problematic for a lot of reasons. Problems can get worse, they can also start to involve other parts, and they can ultimately end up causing the system to need to be replaced. Also, in some cases, it's just not safe to keep running an air conditioner that has certain types of damage. Read some examples of problems that can happen here. 

The AC starts running warmer

When you turn on the air conditioning, it should blow cool air each time it kicks on in order to bring down the interior temperature. Should you notice that it is starting to blow warmer air, then you likely have a leak that is allowing the refrigerant to escape, and the refrigerant is needed to cool the air. Someone needs to find and fix this leak, then refill the system with more refrigerant to replace what was lost.

The evaporator coils get an ice buildup on them 

There may be times when you can get a bit of an ice buildup on parts of the air conditioning. This is something that tends to happen more frequently when the outside temperature is extremely hot. This accumulation can be because of a dirty filter, and this is just one of the reasons why it's so important to keep that filter clean. If you notice that there is a lot of ice buildup on the evaporator coils, then this likely means there is a more serious issue going on that needs to be found and repaired. 

The condensation drain isn't draining properly

There is a draining system designed into the air conditioning to handle the condensation. When the system works properly, the condensation is drained away, and if a clog should develop, then there is also built-in protection in which the unit should turn off until the drain has been unclogged. However, if the unit doesn't shut off when there is a clog, then this can cause a serious backup of water that can cause extensive damage to the system and even lead to other issues, ranging from water damage to dangerous mold growth. 

Failing parts are causing problems

Nearly any and every moving or functioning part of the AC can end up needing repairing or replacement at some point. Fans can break, belts can become worn and then break, the motor can become damaged, etc. These types of problems can make themselves known in different ways, from making new noises to causing problems with the cooling in the home. They will usually do something you can notice, and when they do, make sure to have the technician come out to repair whatever is going on. 

The system has an electrical failure

While not so common with newer systems, an electrical failure is something that can happen as the air conditioner gets up there in age. There is a variety of possibilities that can lead to this problem. Just a couple of possibilities include capacitors that are failing or even faulty wiring. A technician needs to be called out for electrical issues right away, and the power to the unit should be shut off for safety reasons until the AC has been looked at by the professional.

To learn more, contact a resource that offers AC repairs.


Share